Adjusting The Total Number Of Dots; Adjusting The Tracking - Canon X600 User Manual

Adjusting the Total Number of Dots

[Total dots]
ANALOG PC
You can adjust the total number of dots in the
horizontal direction.
Display settings
Input signal settings
Total dots
Increases the total number of dots.
>
< Decreases the total number of dots.
Press the [MENU] button when you finish.
Perform this adjustment if the auto PC
adjustment function cannot adjust the
project image correctly.
The setting is recorded for [ANALOG
PC-1] and [ANALOG PC-2] sepa-
rately.
Setting Display Status from the Display Settings Menu

Adjusting the Tracking

[Tracking]
ANALOG PC
You can adjust the tracking when the projected
image flickers due to a tracking error.
Display settings
Input signal settings
Tracking
Increases the set value.
>
< Decreases the set value.
Press the [MENU] button when you finish.
Perform this adjustment if the auto PC
adjustment function cannot adjust the
project image correctly.
The setting is recorded for [ANALOG
PC-1] and [ANALOG PC-2] sepa-
rately.
81