Canon REALiS SX6 User Manual page 135

User Command Specifications
Response Responses are made in the formats below for each parameter.
<Parameter name>=<Type>, <Setting range>
The definition of <Setting range> varies depending on the type.
1. When the type is I (ID)
<Setting range>: = <Setting option 1>, <Setting option 2>, <Setting option 3>,
2. When the type is N (Number)
<Setting range>: = <Setting option 1 minimum value>, <Setting option 1 maximum
value>, <Setting option 2 minimum value>, <Setting option 2 maximum value>, ...,
<Setting option N minimum value>, <Setting option N maximum value>
Description This retrieves the setting range of each parameter.
-1
The setting ranges of the setting or control command parameters may differ depending on the
projector status (input, display mode, etc.).
-2
To ensure reliability, request the setting ranges before sending the setting or control
commands.
(Once the setting ranges have been obtained, the setting or control commands can be
-3
For further details, refer to the descriptions of the commands.
Type Meaning
I ID
N Number
<Setting option 4>, ..., <Setting option N>
PAGE 127
9. Details of command RANGE