Range Guid - Canon REALiS SX6 User Manual

User Command Specifications
1
RANGE GUIDE
RANGE GUIDE
Commands
Function Guide setting enable option request
Format RANGE□GUIDE
Response r:GUIDE=I, <Setting option 1>, <Setting option 2>, ..., <Setting option n>
For all other responses, refer to
Description This command is used to inquire about the parameter options which enable the guide to be set.
(1) This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
However, a "busy" response is given while the zoom or focus lens is being driven.
（ Refer to the
(2) The guide can be set using the
Example > RANGE GUIDE
< r:GUIDE=I, ON, OFF
*Commands are indicated by ">", and responses are indicated by "<".
SX50
Commands
supported ０１．００**
×
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
Model Power supply
OFF ON PM
D-RGB A-RGB1 A-RGB2 Comp
SX50
ー ー ー ー
SX6
× ○ × ○
SX60
X600
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
"Error List."
ZCONTDRV command and FCONTDRV command.
GUIDE command
SX6 SX60 X600
０１．０１** ０１．０１** ０１．０１**
○ ○ ○
Input
Video S-Video D-Video
ー ー ー ー ー
○ ○ ○ ○ ○
Mode Control
）
.
Mode
SCART None Remote
- - ー ー
○ ○ ○ ○
PAGE 170
９．Details of command RANGE GUID
Setting
Reference
ＩＤ
Remarks
Local
ー
×