Range Memcadj - Canon REALiS SX6 User Manual

User Command Specifications
1

RANGE MEMCADJ

RANGE MEMCADJ
Commands
Function Memory color adjustment setting option request
Format RANGE□MEMCADJ
Response r:MEMCADJ=I, <Setting option 1>, <Setting option 2>, ..., <Setting option n>
For all other responses, refer to "Error List."
Description
This command is used to inquire about the parameter options which enable the memory color adjustment
to be set.
(1) This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
However, a "busy" response is given while the zoom or focus lens is being driven.
（ Refer to the
(2) The memory color adjustment can be set using the
Example > RANGE MEMCADJ
< r:MEMCADJ=I, OFF, MEM_L, MEM_M, MEM_H
*Commands are indicated by ">", and responses are indicated by "<".
SX50
Commands
supported ０１．００**
×
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
Model Power supply
OFF ON PM D-RGB A-RGB1 A-RGB2 Comp
SX50
－ － － －
SX6
× ○ × ○
SX60
X600
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
ZCONTDRV command and FCONTDRV command.
SX6 SX60 X600
０１．０１** ０１．０１** ０１．０１**
○ ○ ○
Input
Video S-Video D-Video SCART
－ － － － －
○ ○ ○ ○ ○
Mode Control
）
MEMCADJ command
.
Mode
None Remote
－ － － －
○ ○ ○ ○
PAGE 152
９．Details of command RANGE MEMCADJ
Setting
Reference
ＩＤ
Remarks
Local
－
×