Remote - Canon REALiS SX6 User Manual

User Command Specifications
1

REMOTE

REMOTE
Commands
Function Switch to Remote mode
Format REMOTE
Parameter None
Response
"i:OK" is returned when it was possible to switch the mode properly.
For all other responses, refer to "Error List."
Description This switches to Remote mode.
-1 During Remote mode, all buttons are disabled except for the front panel and remote control
POWER button.
-2
This command can be used in any projector mode.
However, zoom or focus lens drive stops if the zoom or focus lens is being driven.
(Refer to the ZCONTDRV command and FCONTDRV command.)
-3 If, in the power management standby status, the "REMOTE" command was received and
operation was switched to the remote mode, the "power-on" (lamp lighted) status is established
unconditionally.
-4
With the SX50, the setting, control and reference commands except for RC and MAIN can be
used only in the remote mode.
(RC and MAIN can be used only in the "local mode.")
With the SX6, SX60 and X600, there are several setting, control and reference commands
which can be used in the local mode.
(Refer to the LOCAL command.)
-5 When this command is executed, all the statuses and settings listed below are cleared.
・Digital zoom
・Presentation timer display
・Spotlight display
・Screen temporary off (NoShow)
・Freeze image (Freeze)
・Command now being executed (except during "user image registration")
・Focusing, zooming underway (with the SX6, SX60 and X600)
-6 "Guide display" is not cleared by the transfer of operation to the remote mode. If necessary,
clear the display using the GUIDE command.
-7 The current mode can be referenced using the applicable GET command.
Example Mode switching
> REMOTE
< i:OK
Mode viewing
> GET MODE or
< g:MODE=LOCAL
* Commands are indicated by ">", and responses are indicated by "<".
Commands SX50
supported
01.00**
○
Supported Command States
Model Power
OFF ON PM D-RGB A-RGB1 A-RGB2 Comp
SX50 ○ ○ ○ ○
SX6
○ ○ ○ ○
SX60
X600
SX6 SX60 X600
01.01** 01.01** 01.01**
○ ○ ○
Input
Video S-Video
○ ○ ○ ○ ○
○ ○ ○ ○ ○
Mode Control Setting Reference
Mode
D-Video SCART None Remote
– – ○ ○
○ ○ ○ ○
PAGE 14
9. Details of command REMOTE
Remarks
Local
○
○