Get Memcadj - Canon REALiS SX6 User Manual

User Command Specifications
1

GET MEMCADJ

GET MEMCADJ
Commands
Function Memory color adjustment setting inquiry
Format GET□MEMCADJ
?△MEMCADJ
g:MEMCADJ=<Details of adjustment：ＩＤ>
Response
Details of adjustment
OFF
MEM_L
MEM_M
MEM_H
For all other responses, refer to
Description This command is used to inquire about the current memory color adjustment setting.
(1) This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
However, a "busy" response is given while the zoom or focus lens is being driven.
（ Refer to the
(2) The memory color adjustment can be set using the
> GET MEMCADJ or ? MEMCADJ
Example
< g:MEMCADJ=MEM_M
*Commands are indicated by ">", and responses are indicated by "<".
SX50
Commands
supported ０１．００**
×
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
Model Power supply
OFF ON PM
D-RGB A-RGB1 A-RGB2 Comp
SX50
－ － － －
SX6
× ○ × ○
SX60
X600
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
Meaning
No adjustment
Low memory color adjustment
Medium memory color adjustment
High memory color adjustment
"Error List."
ZCONTDRV command and FCONTDRV command.
SX6 SX60 X600
０１．０１** ０１．０１** ０１．０１**
○ ○ ○
Input
Video S-Video D-Video SCART
－ － － － －
○ ○ ○ ○ ○
Mode Control
）
MEMCADJ command
.
Mode
None Remote
－ － － －
○ ○ ○ ○
PAGE 97
９．Details of command GET MEMCADJ
Setting
Reference
ＩＤ
Remarks
Local
－
×