Get Nosig - Canon REALiS SX6 User Manual

User Command Specifications
1

GET NOSIG

GET NOSIG
Commands
Function Screen displayed at startup with no signals setting inquiry
GET□NOSIG
Format
?△NOSIG
Response
g:NOSIG=<Setting：ＩＤ>
Setting
BLACK
BLUE
LOGO
For all other responses, refer to "Error List."
Description This inquires about the current setting for the screen to be displayed when there are no signals.
-1
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 The display screen when there are no signals can be set by the NOSIG command.
Example > GET NOSIG or ? NOSIG
< g:NOSIG=LOGO
* Commands are indicated by ">", and responses are indicated by "<".
Commands
SX50
supported
01.00**
○
Supported Command States
Model Power
OFF ON PM
D-RGB A-RGB1 A-RGB2 Comp
○ ○
SX50 × ×
SX6 ○ ○
× ×
SX60
X600
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Meaning
Black screen
Blue screen
User screen
SX6 SX60 X600
01.01** 01.01** 01.01**
○ ○ ○
Input
Video S-Video D-Video SCART
○ ○ ○ ○ ○
○ ○ ○ ○ ○
Mode Control Setting
Mode
None Remote
○ ○
– –
○ ○ ○ ○
PAGE 108
9．Details of command GET NOSIG
Reference
ID
Remarks
Local
×
×