Range 6Axr-6Axy - Canon REALiS SX6 User Manual

User Command Specifications
1

RANGE 6AXR-6AXY

RANGE 6AXR-6AXY
Commands
Function 6-axis correction R to Y hue/color saturation setting range request
Format
R range inquiry
RANGE□6AXR RANGE□6AXG RANGE□6AXB RANGE□6AXC RANGE□6AXM RANGE□6AXY
Response
r:6AXR(G,B,C,M,Y)=N, <Minimum hue value>, <Maximum hue value>,
<Minimum color saturation value>, <Maximum color saturation value>
For all other responses, refer to "Error List."
Description
This inquires about the range within which the 6-axis correction R to Y hue and color saturation can be
set.
-1 This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
A "busy" response is given while the zoom or focus lens is being driven.
(Refer to the ZCONTDRV command and FCONTDRV command.)
-2 The 6-axis correction R to Y can be set by the 6AXR to Y command.
Example > RANGE 6AXC
< r:6AXC=N, -20, 20, -20, 20
* Commands are indicated by ">", and responses are indicated by "<".
Commands SX50
supported
01.00**
○
Supported Command States
Model Power
OFF ON PM D-RGB A-RGB1 A-RGB2 Comp
○ ○
SX50 × ×
○ ○
SX6
× ×
SX60
X600
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
G range inquiry B range inquiry
SX6 SX60 X600
01.01** 01.01** 01.01**
○ ○ ○
Input
Video S-Video D-Video SCART
○ ○ ○ ○ ○
○ ○ ○ ○ ○
Mode Control Setting
C range inquiry M range inquiry Y range inquiry
Mode
None Remote
○ ○
– –
○ ○ ○ ○
PAGE 154
9．Details of command RANGE 6AXR-6AXY
Reference
Number
Remarks
Local
×
×