Uefi Raid; Configuring A Sata Raid Volume With The Internal Raid Controller; Create Raid Volume - B&R PC 3100 User Manual

Software

7.3.2 UEFI RAID

7.3.2.1 Configuring a SATA RAID volume with the internal RAID controller

The following software description applies to the internal RAID controller on Kabylake-U chipset.
Information:
B&R recommends using only the same drive type in the SATA RAID volume.
Caution!
The maximum number of possible write cycles must be taken into account when setting up a RAID
volume with CFast cards with MLC technology.
Use submenu "Intel(R) Rapid Storage Technology" to navigate to the configuration of the RAID volume.
The following keys can be used in the device manager:
Key
Cursor (↑, ↓)
Enter
ESC

7.3.2.2 Create RAID volume

RAID volumes can be created via submenu
Technology" on page 230.
274
Figure 16: Device manager
Function
Navigation in the menu and between objects.
Selects an item or opens a submenu.
Exits.
Table 185: Keys in the device manager
"Create RAID volume" on page 230 in section
Panel PC 3100 panel mount device User's manual V 2.10
"Intel® Rapid Storage