Setup; Unpacking; Setting Up The Reader - Wasp WWS650 Product Reference Manual

Unpacking

Check carefully to ensure the reader and any accessories ordered are present and undamaged.
If any damage occurred during shipment, contact Wasp.
KEEP THE PACKAGING. Should the unit ever require service, it should be returned in its original
shipping container.

Setting Up the Reader

Follow the steps provided in this section to connect and get your reader up and communicating
with its host.
1. Begin by Connecting the Base Station.
2. Go to Interface Selection
3. Configure Interface Settings
4. Go to Configuring Other Features
Product Reference Guide
and set the desired interface.
(only if not using factory settings for that interface).
(if modifications are needed from factory settings).
Chapter 2

Setup

9