Code 93 Set Length 1 - Wasp WWS650 Product Reference Manual

1D Symbologies

Code 93 Set Length 1

Specifies one of the bar code lengths for
minimum label length if in
Fixed Length on page 245
length can be set from 01 to 50 characters.
Table 19 provides some examples for setting Length 1. See
on setting this feature.
Table 19. Code 93 Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 93 LENGTH 1 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
$CC9L1
Select Code 93 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
Product Reference Guide
Code 93 Length Control on page
Variable Length on page 245
Mode. Length includes the bar code's data characters only. The
EXAMPLES
01 Characters
'0' and '1'
01 = Length 1 is 1 Character
DEFAULT
Enter/Exit Programming Mode
Mode, or the first fixed length if in
page 245
07 Characters 15 Characters
'0' and '7' '1' and '5'
~
CANCEL
164. Length 1 is the
for detailed instructions
50 Characters
'5' AND '0'
165