Customizing Configuration Settings; Configure Interface Settings; Global Interface Features; Configuring Other Features - Wasp WWS650 Product Reference Manual

Customizing Configuration Settings

Configure Interface Settings

If after scanning the interface bar code from the previous table, your installation requires you to
select options to further customize your reader, turn to the appropriate section for your inter-
face type in "Configuration Parameters"
• "RS-232 Interface"
• "RS-232/USB-Com Interfaces"
• "Keyboard Settings"

Global Interface Features

See "Global Interface Features" on page 23

Configuring Other Features

If your installation requires different programming than the standard factory default settings,
the following sections of this manual allow configuration of non-interface-specific settings you
might require:
Data Format Data Format offers options to control the messages sent to the Host system.
:
Reading Parameters
indicators and other universal settings.
Symbology-Specific Parameters
1D Symbologies Includes options concerning the bar code label types (symbologies). These
:
settings allow you to enable/disable symbologies, set label lengths, require check digit, etc.
2D Symbologies Includes options concerning the bar code label types (symbologies). These
:
settings allow you to enable/disable symbologies, set label lengths, require check digit, etc.

Software Version Transmission

The software version of the device can be transmitted over the RS-232 and Keyboard interfaces
by scanning the following label.
RevA
Product Reference Guide
on page 25
on page 30
on page 37
Reading Parameters include programming for scanning, beeper and LED
:
Transmit Software Version
starting on page 21.
for settings configurable by all interface types.
19