Pick Mode; Stand Mode Sensitivity - Wasp WWS650 Product Reference Manual

Enter/Exit Programming Mode

Pick Mode

Specifies the ability of the reader to decode labels only when they are close to the center of the
aiming pattern. This allows the reader to accurately target labels when they are placed close
together, such as on a pick sheet.
This feature is not compatible with Multiple Labels Reading in a Volume.
NOTE
$CSNPM01(CR)
Pick Mode = Enable

Stand Mode Sensitivity

Sets the sensitivity level for stand mode wakeup. Choices are low, medium and high.
$CSMSE01(CR)
Stand Mode Sensitivity = Medium
76
DEFAULT
$CSNPM00(CR)
Pick Mode = Disable
$CSMSE00(CR)
Stand Mode Sensitivity = Low
DEFAULT
$CSMSE02(CR)
Stand Mode Sensitivity = High
Scanning Features
Wasp WWS650