Code 39 Set Length 2 - Wasp WWS650 Product Reference Manual

1D Symbologies

Code 39 Set Length 2

This feature specifies one of the bar code lengths for
Length 2 is the maximum label length if in
fixed length if in Fixed Length on page 111
and full-ASCII shift characters. The length does not include start/stop characters.
Table 4 provides examples for setting Length 2. See
ting this feature.
Table 4. Code 39 Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 39 LENGTH 2 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING .MODE
$CC3L2
Select Code 39 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
EXAMPLES
00 (Ignore This
Length)
'0' and '0'
50 = Length 2 is 50 Characters
DEFAULT
Code 39 Length Control on page
Variable Length on page 111
Mode. Length includes the bar code's check, data,
page 245
07 Characters
'0' and '7'
~
Enter/Exit Programming Mode
Mode, or the second
for detailed instructions on set-
15 Characters 50 Characters
'1' and '5'
CANCEL
111.
'5' AND '0'
113