Code 39 Set Length 1 - Wasp WWS650 Product Reference Manual

Enter/Exit Programming Mode

Code 39 Set Length 1

This feature specifies one of the bar code lengths for
Length 1 is the minimum label length if in
length if in Fixed Length on page 111
only. The length can be set from 0 to 50 characters.
Table 3 provides examples for setting Length 1. See
ting this feature.
Table 3. Code 39 Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 39 LENGTH 1 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
$CC3L1
Select Code 39 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
112
Mode. Length includes the bar code's data characters
EXAMPLES
00 Characters
'0' and '0'
02 = Length 1 is 2 Characters
DEFAULT
Code 39 Length Control on page
Variable Length on page 111
page 245
07 Characters
'0' and '7'
~
Mode, or the first fixed
for detailed instructions on set-
15 Characters 50 Characters
'1' and '5'
CANCEL
Wasp WWS650
Code 39
111.
'5' AND '0'