Setup; Unpacking; Setting Up The Reader - Wasp WLS9600 Product Reference Manual

Unpacking

Check carefully to ensure the reader and any accessories ordered are present and undamaged. If
any damage occurred during shipment, contact Wasp Technical Support. Information is shown
on page
KEEP THE PACKAGING. Should the unit ever require service, it should be returned in its
original shipping container.

Setting Up the Reader

Follow the steps provided in this section to connect and get your reader up and communicating
with its host.
1. Begin by
2. Go to
3.
4. Go to
Product Reference Guide
2.
Installing the Interface
Interface Selection
Configure Interface Settings
Configuring Other Features
Cable.
and set the desired interface.
(only if not using factory settings for that interface)
(if modifications are needed from factory settings)
Chapter 2

Setup

5