Bluetooth Friendly Name - Wasp WWS650 Product Reference Manual

Bluetooth-Only Features

Bluetooth Friendly Name

You can set a meaningful name for the Wasp WWS650 that will appear in the application during
device discovery.
To set a new Bluetooth Friendly Name, scan the barcode below and follow the instructions.
$CBTFN
Set Bluetooth Friendly Name
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
Product Reference Guide
Wasp-WWS650
DEFAULT
[SERIAL_NUMBER_SCANNER]
Enter/Exit Programming Mode
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by a maximum 64 digits from the
Alphanumeric characters in
The digits must be the hexadecimal ASCII representa-
tion of the desired characters. If less than the expected
string of 32 characters are selected, scan the ENTER/
EXIT bar code to terminate the string.
~
CANCEL
Appendix D Keypad.
225