Qr Code Set Length 2 - Wasp WWS650 Product Reference Manual

Enter/Exit Programming Mode
QR Code
Set Length 2
This feature specifies one of the bar code lengths for
Length 2 is the maximum label length if in Variable Length Mode, or the second fixed length if
in Fixed Length Mode. Characters can be set from 0001 to 7,089 characters in increments of
0001 (pad with zeroes).
See page 245 for detailed instructions on setting this feature.
$CQRL2
Select QR Code Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
200
Length 2 is 7,089 Characters
DEFAULT
QR Code Length Control on page
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
Appendix D, Keypad
characters in
your desired character(s). End by scanning the ENTER/
EXIT bar code again.
~
198.
representing
CANCEL
Wasp WWS650