Send Batch; Erase Batch Memory; Rf Batch Mode Transmit Delay - Wasp WWS650 Product Reference Manual

WIRELESS FEATURES

Send Batch

When the scanner is configured in Manual Batch Mode, use the following bar code to initiate
sending of labels stored in batch memory.
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunction with this bar
code.
NOTE

Erase Batch Memory

When the scanner is configured in Manual Batch Mode, use the following bar code to erase any
labels stored in batch memory.
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunction with this bar
code.
NOTE

RF Batch Mode Transmit Delay

Specifies the delay in 10 msec increments between transmitting labels stored in batch memory.
DEFAULT
$CBTTD05(CR)
RF Batch Mode Transmit Delay = 50 mS
Product Reference Guide
BatchSend
Send Batch
BatchClear
Erase Batch Memory
Enter/Exit Programming Mode
$CBTTD00(CR)
RF Batch Mode Transmit Delay = No Delay
$CBTTD0A(CR)
RF Batch Mode Transmit Delay = 100 mS
217