Micro Qr Code Set Length 2 - Wasp WWS650 Product Reference Manual

Symbology Selection
Micro QR Code
Set Length 2
This feature specifies one of the bar code lengths for
201. Length 2 is the maximum label length if in Variable Length Mode, or the second fixed
length if in Fixed Length Mode. Characters can be set from 0001 to 0035 characters in incre-
ments of 0001 (pad with zeroes).
See page 245 for detailed instructions on setting this feature.
$CMQL2
Select QR Code Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Length 2 is 0035 Characters
DEFAULT
Enter/Exit Programming Mode
Micro QR Code Length Control on page
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits from the Alphanumeric char-
Appendix D, Keypad
acters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
~
representing your
CANCEL
203