Bt Pin Code; Select Pin Code Length; Set Pin Code - Wasp WWS650 Product Reference Manual

Enter/Exit Programming Mode

BT PIN Code

After enabling Security Mode (see
set a 4-digit or a 16-digit PIN Code.
setting this feature.

Select PIN Code Length

$CBTPS00\r
Select 4-character BT PIN Code

Set PIN Code

Determine the desired characters for the PIN code, then convert to hexadecimal
Chart on the inside back cover of this manual.
examples for setting this feature.
$CBTPC
Set 4-character BT PIN Code
~
222
"BT Security Mode"
See
CANCEL
DEFAULT
on page
page 265 for detailed information and examples for
~$CBTPS01\r
Select 16-character BT PIN Code
See page 265
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
Appendix D Keypad
characters in
your desired character(s). End by scanning the ENTER/
EXIT bar code again.
$CBTP6
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
31323334 = Default PIN Code is 1234
BT Security Features
221), specify whether you want to
DEFAULT
for detailed information and
Set 16-character BT PIN Code
using the ASCII
representing
Wasp WWS650