Aztec Code Set Length 2 - Wasp WWS650 Product Reference Manual

Enter/Exit Programming Mode

Aztec Code Set Length 2

This feature specifies one of the bar code lengths for
Length 2 is the maximum label length if in Variable Length Mode, or the second fixed length if
in Fixed Length Mode. Characters can be set from 0001 to 3,832 characters in increments of
0001 (pad with zeroes).
See page 245 for detailed instructions on setting this feature.
$CAZL2
Select Aztec Code Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
182
Length 2 is 3,832 Characters
DEFAULT
Aztec Code Length Control on page
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits from the Alphanumeric char-
Appendix D, Keypad
acters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
~
representing your
CANCEL
Wasp WWS650
180.