Msi Set Length 1 - Wasp WWS650 Product Reference Manual

Enter/Exit Programming Mode

MSI Set Length 1

This feature specifies one of the bar code lengths for
is the minimum label length if in
in Fixed Length on page 245
length can be set from 01 to 50 characters.
Table 21 provides some examples for setting Length 1. See
on setting this feature.
Table 21. MSI Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT MSI LENGTH 1 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
$CMSL1
Select MSI Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
170
Variable Length on page 245
Mode. Length includes the bar code's data characters only. The
EXAMPLES
01 Characters
'0' and '1'
01 = Length 1 is 1 Character
DEFAULT
MSI Length Control on page
Mode, or the first fixed length if
page 245
07 Characters 15 Characters
'0' and '7' '1' and '5'
~
CANCEL
169. Length 1
for detailed instructions
50 Characters
'5' AND '0'
Wasp WWS650
MSI