Multiple Labels Ordering By Code Symbology; Multiple Labels Ordering By Code Length - Wasp WWS650 Product Reference Manual

Enter/Exit Programming Mode

Multiple Labels Ordering by Code Symbology

This feature allows you to specify the order multiple labels are transmitted by symbology type,
when Multiple Labels per Frame is enabled. See
tion on setting this feature.
$CSNMS
Select Symbologies for Multiple Labels Ordering
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.

Multiple Labels Ordering by Code Length

Specifies the transmission ordering by code length, when Multiple Labels per Frame is enabled.
$CSNMT01(CR)
Transmit Increasing Length Order
84
000000000000 = Random order
DEFAULT
DEFAULT
page 262 in "References" for detailed informa-
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits From the alphanumeric char-
acters In Appendix d, keypad representing your desired
Character(s). end by scanning the enter/exit bar code
again.
~
$CSNMT00(CR)
Multiple Labels Ordering = Disable
$CSNMT02(CR)
Transmit Decreasing Length Order
Multiple Label Reading
CANCEL
Wasp WWS650