Code 11 Set Length 2 - Wasp WWS650 Product Reference Manual

Enter/Exit Programming Mode

Code 11 Set Length 2

This feature specifies one of the bar code lengths for
Length 2 is the maximum label length if in
fixed length if in Fixed Length on page 245
data characters.
The length can be set from 2 to 50 characters. A setting of 0 specifies to ignore this length
(only one fixed length).
Table 16 provides examples for setting Length 2. See
ting this feature.
Table 16. Code 11 Length 2 Setting Examples
STEP ACTION
Desired Setting (pad with
1
leading zeroes)
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 11 LENGTH 2 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
$CC1.2
Select Code 11 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
154
EXAMPLES
00 (Ignore This
Length)
'0' and '0'
50 = Length 2 is 50 Characters
DEFAULT
Code 11 Length Control on page
Variable Length on page 245
Mode. Length includes the bar code's check and
page 245
07 Characters
'0' and '7'
~
Mode, or the second
for detailed instructions on set-
15 Characters 50 Characters
'1' and '5'
CANCEL
Wasp WWS650
Code 11
152.
'5' and 0'