Plessey Set Length 1 - Wasp WWS650 Product Reference Manual

Enter/Exit Programming Mode

Plessey Set Length 1

This feature specifies one of the bar code lengths for
Length 1 is the minimum label length if in
length if in Fixed Length on page 245
only. The length can be set from 01 to 50 characters.
Table 23 provides some examples for setting Length 1. See
on setting this feature.
Table 23. Plessey Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT Plessey LENGTH 1 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
$CPLL1
Select Plessey Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
174
Mode. Length includes the bar code's data characters
EXAMPLES
01 Characters
'0' and '1'
01 = Length 1 is 1 Character
DEFAULT
Plessey Length Control on page
Variable Length on page 245
page 245
07 Characters
'0' and '7'
~
Mode, or the first fixed
for detailed instructions
15 Characters 50 Characters
'1' and '5' '5' AND '0'
CANCEL
Wasp WWS650
Plessey
173.