Upc-E Check Character Transmission; Upc-E 2D Component - Wasp WWS650 Product Reference Manual

1D Symbologies Enter/Exit Programming Mode

UPC-E Check Character Transmission

Enable this option to transmit the check character along with UPC-E bar code data.
$CEBCT00(CR)
UPC-E Check Character Transmission = Don't Send
$CEBCT01(CR)
DEFAULT
UPC-E Check Character Transmission = Send

UPC-E 2D Component

This feature enables/disables a requirement that a 2D label component be decoded when a
base label for this symbology is decoded.
$CEB2D00(CR)
DEFAULT
UPC-E 2D Component =
Disable (2D component not required)
$CEB2D01(CR)
UPC-E 2D Component =
2D component must be decoded
Product Reference Guide 91