Industrial 2 Of 5 Set Length 2 - Wasp WWS650 Product Reference Manual

Enter/Exit Programming Mode

Industrial 2 of 5 Set Length 2

This feature specifies one of the bar code lengths for
138. Length 2 is the maximum label length if in
ond fixed length if in
data, and full-ASCII shift characters. The length does not include start/stop characters.
The length can be set from 1 to 50 characters. A setting of 0 specifies to ignore this length
(only one fixed length).
Table 12 provides examples for setting Length 2. See
ting this feature.
Table 12. Industrial 2 of 5 Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT INDUSTRIAL 2 OF 5 LENGTH 2 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
$CU2L2
Select Industrial 2 of5 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
140
Fixed Length on page 111
EXAMPLES
00 (Ignore This
Length)
'0' and '0'
DEFAULT
Industrial 2 of 5 Length Control on page
Variable Length on page 111
Mode. Length includes the bar code's check,
page 245
07 Characters
'0' and '7'
~
50 = Length 2 is 50 Characters
Industrial 2 of 5
Mode, or the sec-
for detailed instructions on set-
15 Characters 50 Characters
'1' and '5' '5' AND '0'
CANCEL
Wasp WWS650