Bluetooth-Only Features; Rf Address Stamping; Source Radio Address Transmission - Wasp WWS650 Product Reference Manual

Bluetooth-Only Features

BLUETOOTH-ONLY FEATURES
These features allow configuration of source radio data inclusion.

Source Radio Address Transmission

Enables/disables the ability of source radio address information to be transmitted to the host
and, if so, at what position with respect to the label data. See
detailed information and examples for setting this feature.
When included as a prefix, the source-radio ID is displayed after all label formatting
has been applied. The 6 byte hex address is sent as 12 ascii characters, i.e., an address
of 00 06 66 00 1A ED will be sent as (shown in hex): 30 30 30 36 36 36 30 30 31 41 45 44
NOTE
DEFAULT
$CBTAS01(CR)
Source Radio Address Transmission = Prefix
Product Reference Guide

RF ADDRESS STAMPING

Enter/Exit Programming Mode
page 264
$CBTAS00(CR)
Source Radio Address Transmission = Do Not Include
in "References" for
219