Table of Contents
Advertisement
MEMORY MODE
. R006$
*.R006$*
Example: To set Date to 2017-08-01 (Year-Month-Day):
1. Scan [Set Date]
2. Scan [1], [7], [0], [8], [0], [1] on page 14.
3. Scan [Set Date]
. R007$
*.R007$*
Example: To set Time to 08:10:30 am (Hr:Min:Sec)
1. Scan [Set Time]
2. Scan [0], [8], [1], [0], [3], [0] on page 14.
3. Scan [Set Time]
* Full drain of battery may cause the Time and Date to stop.
To avoid this, please, please fully charge the scanner for
at least 1 hour before use.
DATE & TIME SETUP
SET DATE
SET TIME
- 21 -
MEMORY MODE
DATA FORMAT
The default Data Format is <Date>, <Time>, <Barcode Data> only
below are all items available for display and their codes:
Code
Item
2
Date
4
Barcode Data
Example:
To change Data Format to <Barcode Data>, <Date>, <Time>
1. Scan [Data Format]
2. Scan [4], [2], [3] on page 14.
3. Scan [Data Format]
FIELD SEPARATOR
(DELIMITER)
Default is comma ( , ) You may replace it with any alphanumeric
characters from the full ASCII table in Full User's Manual.
Example: To change Field Separator to Semicolon ( ; )
1. Scan [Field Separator]
2. Scan [ ; ] from the full ASCII table.
3. Scan [Field Separator]
DATA FORMAT
. R011$
*.R011$*
Code
Item
3
Time
. R010$
*.R010$*
- 22 -
Advertisement
Table of Contents
