Beep On Not On File; Ack Nak Options - Wasp WWS650 Product Reference Manual

Enter/Exit Programming Mode

Beep On Not on File

This option enables/disables the action of the reader to sound a three beep sequence upon
receiving a Not-On-File (NOF) host command.
$CBPNF00(CR)
Beep On Not On File = Disable
DEFAULT

ACK NAK Options

This enables/disables the ability of the reader to support the RS-232 ACK/NAK protocol. 
See page 236 for more information.
DEFAULT
$CR2AE01(CR)
ACK/NAK Protocol = Enable for label transmission
$CR2AE03(CR)
ACK/NAK Protocol = Enable for label transmission and host-
command acknowledge
32
$CBPNF01(CR)
Beep On Not On File = Enable
$CR2AE00(CR)
ACK/NAK Protocol = Disable ACK/NAK
$CR2AE02(CR)
ACK/NAK Protocol = Enable for host-command
acknowledge
Wasp WWS650