Other Bt Features; Bluetooth Hid Variable Pin Code - Wasp WWS650 Product Reference Manual

Bluetooth-Only Features

Bluetooth HID Variable PIN Code

Specifies the selection available for Static or Variable Pin Code, when Bluetooth HID profile is
configured.
Some Bluetooth drivers on the Host (such as WIDCOMM and BlueSoleil 8) require a Variable PIN
Code. When attempting connection, the application presents a window that includes a PIN Code
which is to be input using the Wasp WWS650. Scan the bar code "Variable PIN Code" below, then
use the host computer's Bluetooth manager to "Discover new devices" and select "Wasp Scan-
ner." Use a text editor to see incoming data on the port designated by the computer's Bluetooth
manager.
If you receive an error message, it may be necessary to disable
security on the device.
When you hear the beep and see the Green LED blinking indicating the reader is waiting for an
alphanumeric entry, enter the required variable PIN Code by scanning the corresponding bar
codes in Appendix D Keypad
PIN Code label.
$CBTHP00
Set Static Pin Code
~
Product Reference Guide

OTHER BT FEATURES

for alphanumeric entry. Finish by scanning the Exit HID Variable
CANCEL
Exit HID Variable PIN Code
Enter/Exit Programming Mode
DEFAULT DEFAULT
$CBTHP01
Set Variable Pin code
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
223