System And Network Layout; Typical Setup With Cradle And Host - Wasp WWS650 Quick Reference Manual

Connecting the Base Station
nection where its female end mates with the male end of the
cable from the keyboard and the remaining e.nd at the key-
board port on the terminal/PC.
Figure 4. Connecting to the Host
Power Connection —
Plug the AC Adapter into an approved AC
wall socket with the cable facing downwards (as shown in
Figure 3) to prevent undue strain on the socket.

System and Network Layout

Typical Setup with Cradle and Host

Figure 5. Reader Layout
Reader
Host
Base Station
6 WWS650