Code 11 Set Length 1 - Wasp WWS650 Product Reference Manual

1D Symbologies

Code 11 Set Length 1

This feature specifies one of the bar code lengths for
Length 1 is the minimum label length if in
length if in Fixed Length on page 245
characters. The length can be set from 2 to 50 characters.
Table 15 provides some examples for setting Length 1. See
on setting this feature.
Table 15. Code 11 Length 1 Setting Examples
STEP ACTION
Desired Setting (pad with
1
leading zeroes)
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 11 LENGTH 1 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
$CC1L1
Select Code 11 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Mode. Length includes the bar code's check and data
EXAMPLES
02 Characters
'0' and '2'
04 = Length 1 is 4 Characters
DEFAULT
Code 11 Length Control on page
Variable Length on page 245
page 245
07 Characters
'0' and '7'
~
Enter/Exit Programming Mode
Mode, or the first fixed
for detailed instructions
15 Characters 50 Characters
'1' and '5' '5' AND '0'
CANCEL
152.
153