Micro Pdf417 Set Length 2 - Wasp WWS650 Product Reference Manual

Symbology Selection

Micro PDF417 Set Length 2

This feature specifies one of the bar code lengths for
196. Length 2 is the maximum label length if in Variable Length Mode, or the second fixed
length if in Fixed Length includes the bar code's data characters only. Characters can be set
from 0001 to 0366 characters (pad with zeroes) in increments of 01. Any value greater than
0366 will be considered to be 0366.
See page 245 for detailed instructions on setting this feature.
$CMIL2
Select Micro PDF417 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Length 2 is 0366 Characters
DEFAULT
Enter/Exit Programming Mode
Micro PDF417 Length Control on page
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
Appendix D, Keypad
characters in
your desired character(s). End by scanning the ENTER/
EXIT bar code again.
~
representing
CANCEL
197