Industrial 2 Of 5 Set Length 1 - Wasp WWS650 Product Reference Manual

1D Symbologies

Industrial 2 of 5 Set Length 1

This feature specifies one of the bar code lengths for
138. Length 1 is the minimum label length if in
fixed length if in Fixed Length on page 111
ters only. The length can be set from 0 to 50 characters.
Table 11 provides some examples for setting Length 1. See
instructions on setting this feature.
Table 11. Industrial 2 of 5 Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT INDUSTRIAL 2 OF 5 LENGTH 1 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
$CU2L1
Select Industrial 2 of 5 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
Product Reference Guide
EXAMPLES
00 Characters
'0' and '0'
01 = Length 1 is 1 Character
DEFAULT
Industrial 2 of 5 Length Control on page
Variable Length on page 111
Mode. Length includes the bar code's data charac-
page 245
07 Characters
'0' and '7'
~
Enter/Exit Programming Mode
Mode, or the first
if you want detailed
15 Characters 50 Characters
'1' and '5' '5' AND '0'
CANCEL
139