Table of Contents
Advertisement
3.2
SETUP PROCEDURES
For WLS8600 Series readers, follow the setup procedures in pars. 3.3, and 3.4.
Proceed as shown in the following diagram:
1. Restore default parameters
Scan the Restore Default barcode at section 3.3,
WLS8600 Setup.
2. Scan the interface code
Go to section 3.4, Interface Selection and choose
the appropriate barcode for your application.
BEGIN SETUP
Follow the procedure indicated
below.
END SETUP
Your reader is now ready to read
barcodes using the default settings.
CONFIGURATION
7
Advertisement
Table of Contents
