Standard 2 Of 5 Set Length 1 - Wasp WWS650 Product Reference Manual

1D Symbologies

Standard 2 of 5 Set Length 1

This feature specifies one of the bar code lengths for
134. Length 1 is the minimum label length if in
fixed length if in Fixed Length on page 111
data characters. The length can be set from 1 to 50 characters.
Table 9 provides some examples for setting Length 1. See
instructions on setting this feature.
Table 9. Standard 2 of 5 Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT STANDARD 2 OF 5 LENGTH 1 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
$CS2L1
Select Standard 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
EXAMPLES
01 Character
'0' and '1'
08 = Length 1 is 8 Characters
DEFAULT
Standard 2 of 5 Length Control on page
Variable Length on page 134
Mode. Length includes the bar code's check and
page 245
07 Characters
'0' and '7'
~
Enter/Exit Programming Mode
Mode, or the first
if you want detailed
15 Characters 50 Characters
'1' and '5' '5' AND '0'
CANCEL
135