Configuring The Base Station; Connecting The Base Station - Wasp WWS650 Product Reference Manual

Configuring the Base Station

Connecting the Base Station

Figure 2 on page 12
device. Turn off the host before connection and consult the manual for that equipment (if nec-
essary) before proceeding. Connect the interface cable before applying power to the Base Sta-
tion.
The power supply connects directly to the base (not on the cable's jack) for all configurations.
For all interfaces (except RS-232) a power supply is recommended but not necessary, because
the base can be powered from the Host. When the base is powered from the Host, it automati-
cally selects a slow charge rate.
The Wasp WWS650 can also be Powered by the Terminal. When powered by the Terminal, the
battery charger is automatically set as Slow charge.
For some specific interfaces or hosts or lengths of cable, the use of an external power supply
NOTE
may be recommended for full recharging capability (see
page 267 for more details).
10
shows how to connect the Base Station to a terminal, PC or other host
"Technical Specifications"
Wasp WWS650
on