Report 0X25 - Cardholder Selection Response Report - Magtek DynaPro Go Programmer's Manual

4 - Command Set

4.4.6 Report 0x25 - Cardholder Selection Response Report

The device sends this report to the host to provide a response to Command 0x06 - Request Cardholder
Selection.
Table 4-62 - Usage Table for Report 0x25
Bit 7
Byte 0 0x25
Byte 1 Operation Status (see Table 4-99 - Operation Status Codes on page 163)
Code of key pressed:
0x71 = Left function key
Byte 2 0x72 = Middle function key
0x74 = Right function key
0x78 = Enter key
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Programmer's Manual (COMMANDS)
6 5 4
Page 99 of 247 (D998200136-31)
3 2 1 0