Magtek DynaPro Go Programmer's Manual page 125

4 - Command Set
Figure 4-22 – DynaPro Go Request Start EMV Transaction Insert Card - Contact, Contactless, and MSR
7) If the cardholder swipes a magnetic stripe card, the device meets EMV 4.x requirements by checking
the service code from the magnetic stripe data to see if it begins with a 2 or a 6 to determine if the
card also includes a chip, and advises the cardholder that EMV is preferred by displaying
(similar to the screenshots for Command 0x07 - Display Message). If the chip fails or the
READER
service code does not begin with a 2 or a 6, the device prompts the cardholder for an MSR swipe.
After a successful swipe, the device prompts the cardholder to select
cardholder selects
Debit
PIN function is not supported, the device prompts only for
8) If the cardholder inserts a contact chip card, depending on the device's payment brand account type
setting for ICC the Acquirer has set in tag DFDF73 [see Appendix D MagTek Custom EMV Tags
(EMV Only)] the device does one of the following:
a) Assume Credit, Debit, or Default.
b) Prompt the cardholder to select
9) If the cardholder has inserted a contact chip card, the device shows ICC applications that are mutually
supported by both the card and the device, and asks the cardholder to choose the preferred ICC
application. If there is no mutually supported application, the device may show
If a PIN entry is needed per EMV 4.x requirements, the device shows
entry timer (similar to the screenshots for Command 0x04 - Request PIN Entry). If the cardholder
cancels the transaction or the transaction times out, the device performs Command 0xA2
Completion. When the device is configured to allow PIN bypass using tag DFDF68, the PIN
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Programmer's Manual (COMMANDS)
, the device requests a PIN. When using EMV Configuration C5, where the
Credit , Default
Figure 4-23 - DynaPro Go Select Credit, Default, Debit
Page 125 of 247 (D998200136-31)
or
Debit
Credit .
, or Debit .
ENTER PIN
USE CHIP
. If the
Credit
CARD BLOCKED .
and starts the PIN