Magtek DynaPro Go Programmer's Manual page 90

4 - Command Set
Bit 7
ICC Master and Session Key Status
Bit 0:
1 = No Acquirer Master Key Injected
Bit 1:
1 = No ICC Session Key Active
Bit 2:
1 = CAPK EMV database corrupted
Byte 6
Bit 3:
1 = EMV Terminal / Payment Brand Database corrupted
Bit 4:
1 = Card Present in chip card connector
Bit 5 (Contactless Chip Card Only):
1 = Contactless Database corrupted
Extended Device Certificate Status (802.11 Wireless Only, Otherwise Reserved). See
Byte 7
Table 4-54 – Extended Device Certificate Status Codes.
Table 4-51 - Session State Codes
Status/Msg
Bit 7
Pwr
Chg
The bits of Session State mean the following:
Pwr Chg:
1 = Power Change Occurred (occurs on Power up or after a USB resume)
Card Data:
1 = Card Data Available
Session State
MSR PAN:
1 = PAN Parsed from Card
EXPAN:
1 = External PAN Sent
Amt:
1 = Amount sent
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Programmer's Manual (COMMANDS)
6 5
6 5 4
0 0 0
Page 90 of 247 (D998200136-31)
4 3 2
Value
3 2
Card Data MSRPAN
1 0
1 0
EXPAN Amt