Report 0X2A - Delayed Response Ack - Magtek DynaPro Go Programmer's Manual

4 - Command Set

4.4.11 Report 0x2A - Delayed Response ACK

This event is triggered by completion of longer-running commands that need to report status back to the
host. It is an asynchronous version of Command 0x01 - Response ACK.
Table 4-70 - Usage Table for Report 0x2A
Bit 7
Byte 0 0x2A
Status of Command ("ACKSTS")
Byte 1
Byte 2 ID for Command reporting status
Bytes 3..n Reserved
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Programmer's Manual (COMMANDS)
6 5 4
Page 106 of 247 (D998200136-31)
3 2 1 0