Magtek DynaPro Go Programmer's Manual page 97

4 - Command Set
Bit 7
Data Block
If Data ID < 0x08, the data block contains track data, encrypted track data, or
MagnePrint data corresponding to the Data ID the device is sending.
If Data ID = 0x63, bytes 4..13 are KSN data; bytes 14..17 are MagnePrint Status data.
If Data ID = 0x41, data block is the device's 8 byte serial number.
If Data ID = 0x64, data block is a 4 byte CBC-MAC.
If Data ID = 0x40, data block is the encrypted PAN and Expiration date in the following
Byte 4..n
format:

Start Sentinel(';')

PAN

Separator ('=')

YYMM

('?')
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Programmer's Manual (COMMANDS)
6 5 4
Page 97 of 247 (D998200136-31)
3 2 1 0