Magtek DynaPro Go Quick Installation Manual

Handheld PIN Pad Device with
MagTek
recommends
charging atleast
every 6 months
to maximize
operation.
DynaPro Go
Installing DynaPro Go: Configuration is done prior to deployment for the certificate authority public
keys and terminal and payment brand settings; end users need only set up a host with appropriate
software, configure the software, and connect the device to the host.
Controls
In any solution, DynaPro Go is connected to a host, which must have software installed that knows
how to communicate with the device, and which is capable of processing transactions.
To set up the host to work with DynaPro Go, follow the installation and configuration instructions
provided by the vendor of the host or the host software.
Technical Support contact support@magtek.com
When contacting the support team make sure the device is charged, and have the part number
and serial number(s) available. Installation and Operationa Manual can be found on magtek.com
under support.
DynaPro Go
MSR/Contact/Contactless
Quick Installation Guide
Registered to ISO 9001:2015 © Copyright 2019 MagTek, Inc. PN D998200135 rev rev 60 3/19
Works with Operating Systems
USB Hosts: Windows 7, Windows 8 and 8.1, Windows 10,
Android 4.4.2 and above with USB OTG support
802.11 wireless TLS 1.2 hosts: iOS 7.1 and above, Android 6.0
and above, Windows 7 SP1 and above
Bluetooth LE hosts: iOS 7.1 and above, Android 5.0 and above,
Windows 8.1 and above on hosts that support Bluetooth LE
Secure Connections per Bluetooth Core Specification 4.2.