Appendix D Magtek Custom Emv Tags (Emv Only) - Magtek DynaPro Go Programmer's Manual

Appendix D - MagTek Custom EMV Tags (EMV Only)
Appendix D
In addition to the standard EMV tags documented in EMV 4.3, Book 3, Annex A and in Appendix H
EMV Settings (EMV Only), MagTek provides additional custom tags with the device. These are used
with Command 0xA1 - Access EMV Tags, Command 0xA2 - Start EMV Transaction, Command
0xA4 - Acquirer Response ARPC (MAC-MSR), and Command 0xAB - Request EMV Transaction
Data (MAC-MSR). The custom tags are listed in Table 4-103. The characters used in the "Format"
column are described in EMV 4.3, Book 4, Section 4.3.
Table 4-103 - MagTek Custom EMV Tags
Tag
F0 Container for Status, Batch, Reversal, Merchant *
F1 Status Data (Constructed Data Object)
F2 Batch Data (Constructed Data Object)
F3 Reversal Data (Constructed Data Object)
F4 Encrypted MSR Data (Constructed Data Object) *
F5 Encrypted PIN Data (Constructed Data Object)
F7 Container for Merchant Data
F8 Container for Encrypted Data
F9 Container For Message Authentication (MAC)
FA Container for Generic Data
FB Container for BIN table
FC Container for Encrypted Generic Data
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Programmer's Manual (COMMANDS)
MagTek Custom EMV Tags (EMV Only)
Description
Page 164 of 247 (D998200136-31)
Default (Hex) Format
b
* b
* b
* b
b
* b
* b
* b
* b
* b
* b
* b
Length
var
var
var
var
var
var
var
var
var
var
var
var