Magtek DynaPro Go Programmer's Manual page 152

Appendix A - Examples
a) 0xC0: Ethernet packet header (Ethernet Only | 802.11 Wireless Only)
b) 0x03: Unsolicited response (Ethernet Only | 802.11 Wireless Only)
c) 0x20: Report ID (0x20=Report 0x20 - Device State Report)
d) 0x02: Device state (0x02=Wait for card)
e) 0x08: Session state (0x08=Card data available)
f) 0x40: Device status (0x40=Not authenticated)
g) 0x47: Device certificate status (PIN Key Loader Certificate Revocation List, PIN Key Loader
CA certificate, Device CA Certificate, and Device Certificate exist)
h) 0x07: Hardware status (Keypad calibrated, Mag Head programmed, Tamper sensors active)
i) 0xC0: Ethernet packet terminator (Ethernet Only | 802.11 Wireless Only)
Sample Report 0x20 - Device State Report (Hex)
20 02 08 40 47 07
C0 03 20 02 08 40 47 07 C0
20 02 08 40 47 07
4) After the cardholder swipes the card, the device sends back Report 0x22 - Card Status Report to
the host, which expands to the following bytes:
a) 0xC0: Ethernet packet header (Ethernet Only | 802.11 Wireless Only)
b) 0x03: Unsolicited response (Ethernet Only | 802.11 Wireless Only)
c) 0x22: Report ID (0x22=Report 0x22 - Card Status Report)
d) 0x00: Operation status (0x00=OK)
e) 0x00: Card status (0x00=OK)
f) 0x01: Card type (0x01=Financial card)
g) 0xC0: Ethernet packet terminator (Ethernet Only | 802.11 Wireless Only)
Sample Report 0x22 - Card Status Report (Hex)
22 00 00 01
C0 03 22 00 00 01 C0
22 00 00 01
5) If the operation and the card status are OK, the host retrieves the card data from the device by issuing
Command 0x0A - Request MSR Data, as shown:
Sample Command 0x0A - Request MSR Data:
0A 00
C0 01 0A 00 C0
0A 00
6) The device sends back Command 0x01 - Response ACK to the host.
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Programmer's Manual (COMMANDS)
USB format of command
802.11 and Ethernet format of command
iOS format of command (Note MSB order)
USB format of command
802.11 wireless and Ethernet format of command
iOS format of command (Note MSB order)
USB format of command
802.11 wireless and Ethernet format of command
iOS format of command (Note MSB order)
Page 152 of 247 (D998200136-31)