Report 0X2D - Bluetooth Le Module Control Data (Bluetooth Le Only | Pci Bluetooth Le Only) - Magtek DynaPro Go Programmer's Manual

4 - Command Set
4.4.12 Report 0x2D - Bluetooth LE Module Control Data (Bluetooth LE Only | PCI Bluetooth
LE Only)
This input report event is triggered by completion of Command 0x1D - Set Bluetooth LE Module
Control Data (Bluetooth LE Only | PCI Bluetooth LE Only) after the device returns Command 0x01 -
Response ACK and processes the control data. Important usage notes regarding getting and setting
Bluetooth LE module properties are included in section 4.3.24 Command 0x1D - Set Bluetooth LE
Module Control Data (Bluetooth LE Only | PCI Bluetooth LE Only).
Table 4-71 - Usage Table for Report 0x2D
Byte
Byte 0 0x2D
Byte 1 Control data length (defined in Appendix J)
Bytes 2 to (2 +
control data Control data (defined in Appendix J)
length - 1)
Bytes (2 +
control data Padding. All bytes are zeros.
length) to 63
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Programmer's Manual (COMMANDS)
Description
Page 107 of 247 (D998200136-31)