Magtek DynaPro Go Programmer's Manual page 16
Handheld pin pad device with msr/contact/contactless
Hide thumbs
Also See for DynaPro Go:
- Installation and operation manual (77 pages) ,
- Quick installation manual (4 pages) ,
- Programmer's reference manual (75 pages)
Table of Contents
Advertisement
2 - Introduction
Feature
Configurable EMV Support
Interac Support
US Common Debit AID Auto
Select
1) The number of CAPK key slots per RID depends on firmware revision number. DynaPro firmware
up to revision D provides 8 key slots; revisions E and newer provide 16. DynaPro v3 provides 16
key slots. DynaPro Mini firmware up to revision C provides 8 key slots; revisions D and newer
provide 16.
2) Feature is not agency-certified.
3) DynaPro v1 firmware revision F and newer; DynaPro v3 firmware revision B and newer.
4) Available with Ethernet module firmware version 30050876-A00 and later.
5) Available on DynaPro v3 with Contactless L1 – EMVCo Ver 2.6
6) Available on DynaPro Mini Bluetooth LE firmware revision E or newer.
7) Available on DynaPro v3 firmware version D or newer.
8) No longer supported on DynaPro v3 firmware version D or newer.
9) Available on DynaPro v3 firmware version C4 or newer.
10) Available on DynaPro v3 firmware version E or newer.
11) Available on DynaPro Go firmware version D or newer.
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Programmer's Manual (COMMANDS)
N
Y
Y
Y
10
N
N
Y
Y
10
N
N
Y
Y
Page 16 of 247 (D998200136-31)
Y
N
N
10
N
N
N
10
N
N
N
N
N
N
N
N
N
Advertisement
Table of Contents
Need help?
Do you have a question about the DynaPro Go and is the answer not in the manual?
Questions and answers