The Lcd Display - Panametrics Sentinel User Manual

Table of Contents

Advertisement

3.2.4

The LCD Display

The components of the LCD display are shown in Figure 42 below, along with a typical mass flow rate readout.
As shown in Figure 42 above, the display screen includes the following information:
• Channel Number
• Flow Parameter
• Units of Measure
• Flow Rate Value
CAUTION!
Note:
Error code messages may appear in the lower right corner of the LCD display. For information about these
error codes and how to respond to them, refer to Chapter 4, Error Codes.
Sentinel™ User's Manual
Channel #
CH1 MASS
VEL
Flow Rate
Figure 1: A Typical LCD Flow Rate Display
If the Sentinel is being installed in a hazardous area, be sure to adjust the backlight
brightness and display contrast of the meter LCD window before mounting the system
(see "Adjusting the LCD Contrast and Brightness" on page xxxiv).
Parameter
4500
LB/HR
Chapter 3. Operation
Units
65

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sentinel and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents